CGA SB2000MK2 interface cable Icom IC-746/IC-7400/IC-756x

With the CGA ACC-102 interface cable, you connect a compatible Icom desktop transceiver with an 8-pin connector to the CGA SB-2000MK2 Soundcard & CAT Interface. The cable set is specifically intended for, among others, the Icom IC-746, IC-7400, and IC-756 series and provides the necessary connections for data, CI-V control, and CW.

Are you using the CGA SB-2000MK2 to connect your Icom transceiver to a computer or laptop? Then the ACC-102 provides the appropriate cabling to correctly connect both devices.

Complete cable set for the CGA SB-2000MK2

The CGA ACC-102 combines various connections in one cable set. The set features an 8-pin data cable, a 1/8 inch CI-V cable, and a 1/4 inch connector for CW.

This means the cable set has the connections needed to use various functions of the SB-2000MK2 in combination with a suitable Icom transceiver.

The SB-2000MK2 brings together the different connections needed for communication between radio software on the computer and the transceiver. Instead of using separate solutions for audio, control, PTT, and CW, the SB-2000MK2 forms a single central interface between radio and computer.

For which Icom transceivers is the CGA ACC-102 suitable?

According to the available product information, the CGA ACC-102 interface cable is intended for the following Icom desktop transceivers:

• Icom IC-746 and IC-746Pro
  
• Icom IC-7400
  
• Icom IC-756, IC-756Pro, IC-756Pro2, and IC-756Pro3

Always check the exact model number of your transceiver before ordering and ensure it matches the stated compatibility.

CI-V control and digital modes via the SB-2000MK2

For communication with compatible Icom transceivers, the SB-2000MK2 can use CI-V control. In combination with suitable radio software, the computer and transceiver can, for example, exchange data about the set frequency and band.

The audio connection between the computer's sound card and the transceiver can also run through the SB-2000MK2. This allows you to use the interface for digital modes such as RTTY, PSK31, SSTV, and FAX. In addition, the SB-2000MK2 supports applications such as CW, FSK, and PTT control, and recording SSB conversations via the computer.

The CGA ACC-102 provides the necessary physical connection between the connectors of the suitable Icom transceiver and the SB-2000MK2.

Please note: this is the cable set

The CGA ACC-102 is a separately available interface cable for the CGA SB-2000MK2. The SB-2000MK2 interface itself is not part of this cable set.

Always check before ordering whether your exact Icom model and connection match the compatibility mentioned above.

Connect your Icom desktop transceiver neatly to your CGA SB-2000MK2. Order the CGA ACC-102 interface cable and make the right connection for CI-V control, digital modes, and other supported functions.

We also have interface cables for the SB2000MK2 for other models:

• CGA ACC-101: Yaesu FT-1000MP (MK-V, MK-V Field), FT-2000 and FT-9000(DX).
  
• CGA ACC-102: for Icom with 8-pin connector: IC-746 (Pro), IC-7400 and IC-756 series (Pro, Pro2 and Pro3).
  
• CGA ACC-103: for Icom with 13-pin ACC connector, including IC-703, IC-706 (MK2, MK2G), IC-717, IC-78, IC-718, IC-7000*, IC-7200 and IC-7100*.
  
• CGA ACC-104: Yaesu FT-450, FT-950 and FT-DX3000D.
  
• CGA ACC-105: Yaesu FT-100(D), FT-817, FT-857(D) and FT-897(D).
  
• CGA ACC-106: for 13-pin Kenwood models TS-570, TS-2000, TS-590, TS-990 and TS-870S.
  
• CGA ACC-107: Kenwood TS-480SAT and TS-480HX.