Mashin SC-600

The Mashin SC-600 battery charger is the ultimate solution for charging and maintaining all types of lead-acid batteries. Fully automatic, spark-proof and reverse polarity protected, these chargers offer a worry-free experience for both professional and everyday users. Thanks to the advanced technology, batteries are safely charged, maintained and revitalized without the risk of overcharging or undercharging. This significantly extends the lifespan of your battery.

The Mashin SC-600 complies with major international standards such as CE, FCC, CEC (California Energy Commission) and RoHS , ensuring reliability and safety.

Key Features:

Smart charging technology

• Pulsed charging : Removes sulphate build-up on the electrode plates, restores energy storage capacity and extends battery life.
  
• Cycle Charged Function : Maintains voltage and performs periodic maintenance charges, keeping the battery fully charged at all times.
  
• Boost Charge Mode: Activates batteries that are deeply discharged or no longer respond to normal charging modes.

Selectable charging options

• Choose from charging currents of 1A, 4A or 6A to meet the specific needs of your battery.
  
• USB Charging Port: Power your portable devices through the
• built-in 5V USB port (maximum 1.5A).
  
• Full safety protection
  
• Protection against reverse polarity, short circuit and sparks.
  Automatic shutdown when disconnected to prevent accidents.
  

Ease of use and safety features:

• Pulsed charged: Pulse mode can remove the lead sulfate crystallization which was adhered to the electrode plate and recover the proper energy storage area of ​​the electrode plate.
• Cycle Charged Function: When the battery voltage drops, it will automatically perform a floating charge and periodically perform long-term charging to ensure that the battery is fully charged in the normal state
• Boost Charging Mode (Battery Rescue Mode): When batteries are unable to perform normal mode or cannot be charged, AI Boost Charging Mode can be performed.
• 1A / 4A / 6A charging current selectable.
• Handheld Device Charging Function: Standard 5V USB Charging Port Support Maximum 1.5A.
• Full Safety Protection: Prevent the battery from reverse polarity, short circuit, anti-is. the battery will automatically turn off the DC output when disconnected to prevent spark and short circuit.

8 phase settings:

1. Soft start: Tests whether the battery can accept charge. Charging starts if the battery is OK.
2. Pulse: Pulsing voltage removes sulfates from the battery's conductive plates and restores battery capacity.
3. Bulk: Charge with maximum current to approximately 80% battery capacity.
4. Absorption: Charging with constant voltage and decreasing current equalizing and maximizing battery capacity.
5. Test: Tests whether the battery can hold charge. If the battery voltage drops below 11.6V within 10 minutes, the battery is defective.
6. Floating: Keep the battery voltage at its maximum level by delivering a constant voltage charge.
7. Maintenance: Battery maintenance mode active when battery voltage is lower than 12.6V, charger will automatically start maintenance charging.
8. Top up: Automatically recharge your battery every 15 days after it is fully charged.