Microphone adapter cable 4-Pin Male / 6-Pin Female

Do you want to connect a 4-pin microphone with Uniden/President wiring to a radio with a President 6-pin microphone connection? With this handmade 4-pin male to 6-pin female microphone adapter cable, you can make the necessary connection without having to modify your microphone's connector.

The adapter is suitable, for example, for 4-pin Astatic microphones that use the Uniden/President wiring listed below. This allows you to continue using a suitable existing microphone on a radio with President 6-pin wiring.

Please note: the UP/DOWN function is not supported via this adapter.

What is this 4-pin to 6-pin microphone adapter used for?

Not every microphone and radio uses the same connector and pinout. A proper mechanical connection alone is therefore not enough: the wiring must also match.

This 4-pin to 6-pin microphone adapter is specifically intended for a 4-pin microphone with Uniden/President wiring that you want to use on a radio with the aforementioned President 6-pin wiring.

This makes the adapter interesting, for example, when you have a suitable Astatic microphone that you want to connect to a compatible President radio. Instead of replacing your microphone's connector, you place the adapter between the microphone and the radio.

What is the pinout of the adapter?

Always check before ordering whether the wiring of your microphone and radio matches the configuration below. The number of pins alone does not determine whether a microphone is actually compatible.

4-pin connection:

1. Ground
   
2. Modulation
   
3. TX
   
4. RX

6-pin connection:

1. Modulation
   
2. RX
   
3. TX
   
4. Not connected
   
5. Ground
   
6. Not connected

The adapter converts these connections so that a suitable 4-pin microphone with the specified wiring can be used on a compatible 6-pin connection.

Also suitable for Astatic microphones?

Yes, this microphone adapter cable can be used for compatible 4-pin Astatic microphones, for example, provided they use the Uniden/President wiring described above.

Always check this before ordering. Different microphone wiring schemes exist, and a 4-pin connector does not automatically mean that every 4-pin microphone has the same pinout.

The same applies to the radio: it must feature the corresponding President 6-pin wiring.

Without UP/DOWN control

An important point to note is that the UP/DOWN function of a microphone is not supported by this adapter. The unused pins 4 and 6 of the 6-pin connection are not connected.

Do you need UP/DOWN control on the microphone? Then this adapter is not the right solution for that.

High-quality, handmade microphone adapter cable

This 4-pin male to 6-pin female microphone adapter cable is handmade and intended as a practical solution when you want to continue using a suitable 4-pin microphone.

Key features:

• 4-pin male to 6-pin female microphone adapter
  
• For 4-pin microphones with Uniden/President wiring
  
• For radios with the specified President 6-pin wiring
  
• Suitable for compatible Astatic microphones, for example
  
• Handmade quality product; UP/DOWN function not supported
  
• Use your 4-pin microphone on a suitable 6-pin radio

Use your 4-pin microphone on a suitable 6-pin radio

Do you have a good 4-pin microphone that you would like to keep using? Then this adapter can provide a simple solution to combine it with a suitable President 6-pin connection.

Always check the pinout of both the microphone and the radio before ordering. This prevents you from choosing the wrong adapter based solely on the number of pins.

Order the 4-pin to 6-pin microphone adapter cable and easily connect your suitable 4-pin microphone to a compatible 6-pin radio.