Moonraker DPC-W Dipole center

Building your own dipole antenna or another suitable wire antenna? Then the feed point literally forms the center of your antenna. The Moonraker DPC-W Dipole Centre is a practical dipole center that allows you to connect the two antenna wires and a suitable open feed line.

This version has an open direct feed connection and is intended for use with, among other things, 300 or 450 ohm ladder line (ladder ribbon) or a similar feed line. This makes the DPC-W particularly interesting for radio amateurs and antenna builders who want to assemble their own wire antenna and consciously choose a symmetrical open feed line.

What is a dipole center?

A dipole basically consists of two antenna elements that run in opposite directions from a central point. The component in the middle is often called the dipole center or feed point.

The Moonraker DPC-W is intended to form this central point of a wire antenna. The antenna wires can be attached on both sides, while the feed line is connected centrally.

This gives you a practical central component with which you can further build your own antenna project.

For building your own wire antenna

Building antennas yourself remains one of the most enjoyable aspects of the hobby for many radio amateurs. You can experiment with different antenna constructions, lengths, and mounting options, and tune the antenna to your own situation.

The Moonraker DPC-W is a simple but important antenna component for this. Instead of a completely pre-assembled antenna, you only buy the dipole center and decide for yourself which suitable antenna wire and feed line you use for your project.

This makes this Moonraker especially interesting for DIY enthusiasts who like to assemble their own dipole antenna or wire antenna.

Open connection for 300 or 450 ohm ladder line

An important difference from dipole centers that, for example, have a coax connector, is the open direct connection of the DPC-W.

According to Moonraker, this version is intended for a direct feed with 300 ohm or 450 ohm ladder ribbon, or ladder line, or a similar feed line.

You connect the suitable open feed line directly to the feed point. This makes the DPC-W a logical choice when you consciously want to use ladder line for your antenna construction instead of a dipole center with a coaxial connection.

A practical component for your own antenna project

The appeal of DIY is largely in the freedom to assemble your antenna yourself. The Moonraker DPC-W gives you a practical central connection point for this.

Whether you want to build a new dipole antenna or replace parts for an existing wire antenna project: with a separate dipole center, you can determine the rest of the antenna construction yourself.

Combine the DPC-W with a suitable antenna wire and 300 or 450 ohm ladder line and you have a good basis for further building your antenna project.

Key features

• Dipole center: central feed point for building a suitable dipole or wire antenna.
  
• For DIY: practical Moonraker antenna component for your own antenna projects.
  
• Open direct feed: no fixed coaxial connection, but an open connection for the feed line.
  
• 300 ohm ladder line: suitable for direct connection of 300 ohm ladder ribbon.
  
• 450 ohm ladder line: also suitable for 450 ohm ladder ribbon or a similar feed line.

For the enthusiastic antenna builder

A good wire antenna starts with the right components. With the Moonraker DPC-W, you have a simple and practical dipole center for antenna projects that use an open feed line.

You retain the freedom to choose the antenna wire, feed line, and further construction that suit your antenna project.

Building your own dipole antenna or wire antenna with ladder line? Choose the Moonraker DPC-W Dipole Centre and create a practical central feed point for your antenna project.