Samlex pure sine wave inverter 12V to 230V 1100W

Do you need more power on the go to use 230V equipment from a 12V battery system? This Samlex pure sine wave inverter converts 12V DC voltage to 230V AC voltage, providing 1100 watts of continuous power. A maximum of 2200 watts is available for short-term power peaks.

This makes this Samlex an interesting choice for heavier mobile applications where a smaller inverter does not offer sufficient capacity. Consider use in a car, camper, boat, or commercial vehicle, but also during events and road trips such as the Carbage Run or Barrel Challenge.

On the front, there are two European VDE sockets. This provides you with a practical 230V power supply on the go from a suitable 12V battery system.

What does the Samlex 12V to 230V inverter do?

The Samlex inverter converts the DC voltage of a 12V battery or battery bank to 230V AC ±3%.

According to the specifications, the input voltage is between approximately 10.5 and 16.5V DC. The inverter then provides a maximum of 1100 watts of continuous power and features a peak power of 2200 watts.

This allows you to use suitable 230V equipment in locations where no regular mains connection is available.

Why choose a pure sine wave inverter?

This Samlex produces a pure sine wave output voltage.

A pure sine wave approximates the waveform of the regular electricity grid, making the inverter suitable for a wide variety of 230V equipment, as long as the power consumption and any starting surge remain within the capabilities of the inverter.

This is especially interesting when you want to be able to use different types of equipment on the go and require a stable, sinusoidal 230V output to do so.

What can you use an 1100W Samlex inverter for?

With 1100 watts of continuous power, this version offers considerably more capacity than the smaller Samlex models. This makes it suitable for a wide range of mobile applications.

For example, think of:

• In a camper, boat, or commercial vehicle with a suitable 12V battery system
• During road trips and events such as the Carbage Run or Barrel Challenge
• For using or charging suitable laptops, tablets, and other electronics
• For a suitable 230V battery charger or other electrical equipment on the go
• For 230V devices whose continuous consumption and starting surge fall within the capacity of the inverter

What do 1100 watts continuous and 2200 watts peak power mean?

When choosing an inverter, it is important to distinguish between continuous power and peak power.

This Samlex can supply a maximum of 1100 watts continuously. In addition, a peak power of up to 2200 watts is specified for short-term higher power demands.

This does not mean that a device with a continuous consumption of 2200 watts is suitable. The peak power is intended to handle a temporary higher power demand. Therefore, always check both the normal consumption and any starting surge of the equipment you wish to connect.

Two 230V sockets on the front

On the front of the inverter, there are two European VDE AC sockets.

This offers more connection options than Samlex versions with a single AC output. The total connected power of the devices used must, of course, remain within the available power of the inverter.

The output frequency is selectable between 50 and 60 Hz.

What protections does this Samlex inverter have?

For mobile use, the inverter has several built-in protection functions.

According to the product specifications, the Samlex is protected against low input voltage, high input voltage, overheating, overload, and short-circuiting.

In addition, the device has a low battery voltage alarm and a shutdown function when the voltage drops too low. LED indicators provide information about the power and protection status.

Low idle consumption and remote control option

Despite the higher output power, an idle current of less than 0.7 amps is specified for this Samlex.

This is relevant when used from a battery, because the inverter's own power consumption also affects the available battery capacity.

The inverter also has a remote input. The Samlex RC15 remote control is available as an accessory. This allows the controls to be moved to a more accessible location when the inverter is, for example, permanently installed in a vehicle, boat, or technical space.

Key benefits

• Pure sine wave inverter from 12V DC to 230V AC with 1100 watts of continuous power
• High peak power of up to 2200 watts for short-term power demands
• Two European 230V sockets and selectable output frequency of 50/60 Hz
• Extensive protection against undervoltage, overvoltage, overheating, overload, and short-circuiting
• Remote input for remote control with a suitable Samlex remote

Optionally available

• Samlex RC15 remote control

Powerful 12V inverter for on the go

Whether you want to create a 230V power supply in a camper, boat, commercial vehicle, or car, this Samlex gives you significantly more power than the compact 250W and 400W versions.

The combination of 1100 watts of continuous power, 2200 watts of peak power, and two 230V outputs makes the inverter suitable for situations where multiple or heavier devices need to be used, provided the total power remains within the specifications.

This can also be practical during a long road trip or event. This way, you can use equipment on the go that normally requires a 230V connection from a suitable 12V system.

Order the Samlex 12V-230V 1100W pure sine wave inverter from Deltron and create a powerful 230V power supply from your 12V battery system.