Uniden UBCD3600XLT Set

Favorites Scan - Allows you to organize your systems into Favorites Lists. The scanner will scan multiple favorites lists and the entire database at the same time.

• 4GB microSD card (supplied 1GB to 32GB supported) - For storing favorites lists, profiles, all your settings, discovery sessions and recording sessions.
• Location Based Scanning - Connect to a GPS receiver (not included) for accurate system selection and continued reselection as you travel. The scanner can automatically avoid and not evade Systems and Departments based on your current location as determined by an external GPS device.
• Range Control - Allows you to set how far from your current location the scanner will search for channels in favorites lists. Location precision for departments and sites allows you to define a location and range using rectangles instead of just a single circle.
• Trunk Tracker V Operation - Scans APCO 25 Phase 1 and Phase 2, DMR, Motorola, EDACS, EDACS ProVoice and LTR trunked systems, as well as conventional analog and P25 digital transmitters.
• Multi-Site Trunking - Allows you to program the scanner to share trunking system IDs across multiple locations without duplicating IDs.
• Control Channel Scan Only - With Motorola trunking frequencies, you do not need to program voice channel frequencies.
• Instant Replay - Plays up to 240 seconds (4 minutes) of the most recent broadcasts.
• Audio Recording - Capture transmissions for later playback.
• Custom Alerts - You can program your scanner to alert you when you hit a Channel or Unit ID, a Close Call, an ID is sent with an Emergency Alert, or a Tone-out hit. For each alert in the scanner, you can choose from 9 different tone patterns, 15 volume settings, 7 colors, and 2 flash patterns.
• Multicolor LED Alert - The alarm LED with 7 colors, blue, red, magenta, green, cyan, yellow or white, can be used with your Custom Alerts.
• Trunking Discovery - Monitors system traffic on a trunked radio system to find unknown IDs and automatically records audio from and logs new channels for later identification.
• Conventional Discovery - Searches frequency ranges to find unknown frequencies and automatically records audio from and logs new channels for later reference and identification.
• Scanning Service Types - Scan your channels by custom service types such as government, marine radio, aviation, etc.
• Search Speed ​​​: 80 steps/sec. (Typical) in Search mode (max) except for 5 kHz steps. 250 steps/sec. (Typical) in Search mode (max) - (Turbo Search) for 5 kHz steps.
• Multi-Level Display and Keyboard Light - Makes the screen and keyboard easy to see in low light with three light levels.
• Temporary or permanent blocking - Temporary or permanent blocking of channels / systems / sites / departments / channels
• System / Channel Number Tagging - Number tags allow you to quickly navigate to a specific favorites list, System or Channel.
• Startup Configuration - You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power on the scanner and press the number key, only those Favorites Lists assigned to the key will be enabled for scanning.
• Close Call© RF Capture Technology - Allows you to set the scanner to detect and provide information about the surrounding radio transmissions. Close Call Do-not-Disturb monitors Close Call activity between channel reception so active channels are not interrupted.
• Broadcast Screen - Allows the scanner to ignore hits in search and Close Call modes. You can also program up to 10 custom frequency ranges that the scanner will ignore.
• Fire Tone-Out Standby / Tone Search - This allows you to set the scanner to alert you when a two-tone sequential page is emitted. You can set up to 32 Tone-Outs. The scanner will also search for and display unknown tones.
• PC Programming - Use the Sentinel software to manage your scanners Profiles, Favorites lists, and firmware updates.
• Analog and Digital AGC - Helps automatically balance the volume between different radio systems.
• Priority / Priority w/ NS Scan - Priority channels let you keep track of activity on your most important channels while monitoring other channels for transmissions.
• Priority ID Scan - Allows you to set priority to talk group IDs.
• Intermediate Frequency Exchange - Changes the IF used for a selected channel/frequency to help avoid image and other mixer - product interference on a frequency.
• Individual Channel Volume Offset - Allows you to adjust the volume offset for each channel.
• Configurable Band Defaults - Allows you to specify the step (5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50, or 100 kHz) and modulation (AM, FM, NFM, WFM, or FMB) for 31 different bands.
• Adjustable Scan/Search Delay/Resume - Set a delay of up to 30 seconds or a forced resume of up to 10 seconds for each channel or search.
• Data Naming - Allows you to name each list as Favorites, System, Site, Department, Channel, ID, Location and Custom Search, using up to 64 characters.
• Duplicate Input Alert - Alerts you if you attempt to enter a duplicate name or frequency already stored in the scanner.
• 100 Shortcuts - You can scan the favorites lists, Systems, and Departments by assigning them to shortcuts.
• Search Blocking - You can temporarily Avoid up to 250 frequencies and permanently Avoid up to 250 frequencies in a Search mode or Close Call mode.
• 10 Custom Searches - Allows you to program up to 10 custom search ranges.
• Search with Scan Operation - This allows you to perform Custom Search ranges during the scan operation.
• 3 Search Keys - You can assign 3 of the number keys to initiate a Custom Search, Tone-Out Search or Close Call Search.
• Quick Search - Allows you to enter a frequency and start searching.
• Built-in charger - Allows you to charge the batteries while they are in the scanner
• Frequency range: 25 - 1300MHz
• Frequency steps: 5/6.25/7.5/8.33/10/12.5/15/20/25/50/100 kHz
• Memory: Favorites list can be stored on the supplied SD card. The Uniden UBCD 3600XLT supports SD cards up to 32GB. Up to 250 skip frequencies programmed, Up to 10 scan frequency ranges can be programmed by the user, Up to 85 saves per second in scan
• Modulation types: AM, FM, NFM, WFM
• Working modes: APCO25 phase 1 and phase 2, DMR, Motorola, EDACS, EDACS Pro Voice, LTR, P25 analog and digital
• Audio Output: 0.8 Watts at 24 Ohms
• Antenna connection: SMA
• Connections: DC jack, antenna, headphones and USB
• Antenna impedance: 50 Ohm
• Power supply: internal batteries or via USB (5V DC, charging function)
• Working temperature: -10 to +70 degrees
• Dimensions: 71.1 x 36.9 x 160.9mm (without antenna)
• Weight: 348.7 grams