AOR GT-1 MK2 Galvanic isolation transformer DV3

Are you experiencing interference, noise, or unwanted signals on your receiver? The AOR GT-1 MK2 Galvanic Isolation Transformer is specifically designed to reduce ground loop related interference and improve your receiver's reception quality. This high-quality AOR accessory provides an effective solution for radio amateurs, SDR users, and monitoring stations aiming for the cleanest possible reception signal.

The GT-1 MK2 is placed between the antenna and the receiver and interrupts the electrical connection between both systems. This prevents interference originating from computers, switching power supplies, and other electronic equipment from reaching the receiver via the antenna cable.

Effective noise reduction for optimal reception

In many receiving installations, ground loops occur because the antenna installation and the receiver are at different electrical potentials. This can lead to extra noise, hum, or interference, which is particularly noticeable on lower frequency bands.

The AOR GT-1 MK2 Galvanic Isolation Transformer breaks this ground loop through galvanic isolation. This significantly reduces unwanted interference before it reaches the receiver's antenna input.

Users of SDR receivers, computer-controlled receivers, and listening stations with multiple electronic devices often immediately benefit from a lower noise floor and improved signal reception.

Wide frequency range for diverse applications

With a frequency range of 100 kHz to 400 MHz, the GT-1 MK2 is suitable for a wide range of receiving applications. This means it can be used for, among others:

• Longwave (LW), medium wave (MW), and shortwave (SW)
  
• Airbands
  
• VHF communication
  
• SDR reception systems
  
• Broadband scanners and communication receivers

Thanks to its low insertion loss, the loss of received signals remains limited, while the benefits of a cleaner reception signal are often significantly greater.

Additional protection for your receiver

In addition to reducing interference, the AOR GT-1 MK2 also offers an extra layer of protection against electrostatic discharges (ESD) that can occur via the antenna line. This helps to better protect sensitive receivers against unwanted voltage spikes.

For users of the AOR AR-DV3, the GT-1 MK2 is therefore a valuable addition for a more stable and reliable receiving installation.

Main features

• AOR Galvanic Isolation Transformer for receiving applications
  
• Reduces ground loop related noise and interference
  
• Frequency range from 100 kHz to 400 MHz
  
• Suitable for longwave, shortwave, VHF, and airband
  
• Provides additional protection against electrostatic discharges

Specifically developed for the AOR AR-DV3

The GT-1 MK2 is designed for use with the AOR AR-DV3 digital communication receiver, but can also be used in other receiving installations where galvanic isolation is desired.

Thanks to the BNC Male and Female connectors, installation is simple. Connect the antenna cable to the ANT side and connect the RX side directly to the receiver for a quick and effective improvement of your reception environment.

Do you want to reduce interference and get the most out of your receiver? Choose the AOR GT-1 MK2 Galvanic Isolation Transformer and experience cleaner and more stable reception. Order today from Deltron.nl.